Jeep 5.2L (317 cu in) firing order — diagram & guide
Dive deep into the Jeep 5.2L firing order dynamics.
While Jeep vehicles these days come with all sorts of engines from four-cylinder to V6, back in the day V8 versions were standard. As one such engine, the 5.2-liter has always been praised as one of the most reliable, but it’s still useful to know the Jeep 5.2L (317 cu in) firing order in case of a misfire.
Don’t worry, though – our team will guide you through the importance of the firing order in this engine and what you can do with it. We’ll also dive deep into the cylinder layout of the V8 motor to see what’s the best way to apply the firing order, so stand by for details.
Jeep 5.2L firing order
Let’s go over the essentials first – the Jeep 5.2L firing order is 1-8-4-3-6-5-7-2 and this firing order is mostly the same for all the Magnum V8 engines made in this era.
However, you won’t get far by just knowing hte firing order since you need to know how and why you should use it. Namely, this engine is prone to misfires due to spark plugs that need frequent replacing, and if you follow the firing order of each cylinder, you’ll be able to easily identify it.
This also goes for ignition coils, distributor wires, and a few other maintenance-related things. So, let’s see how you can figure out the cylinder order next.
Jeep 5.2L cylinder diagram
The good thing about this V8 engine is that it features an old-school standard layout of the cylinders. So, there are two cylinder banks – one on the left side, and one on the right side of the engine..
The left cylinder bank houses cylinders 2, 4, 6, and 8, while the right one (driver’s side) holds cylinders 1, 3, 5, and 7. Because of this, it’s easy to diagnose misfire issues and check the cylinders in order, and it’s also important to note that the first cylinder is the front cylinder of the driver’s side bank.
Also, the distributor rotates clockwise, which is what actually determines the cylinder order in this engine.
Jeep 5.2L vehicle applications
This engine was mostly available for one model of Jeep, but it also went into a few other vehicle models back in the day. So, let’s check out the complete list:
- Jeep Grand Cherokee
- Dodge Dakota
- Dodge RAM
- Dodge Durango
In Jeep Grand Cherokee, it was mostly used from 1993 to 1998 in the first-gen model.
Our take
After going through this guide on the Jeep 5.2L firing order, we hope you’ll have a bit easier time maintaining your first-gen Grand Cherokee.
Our team strives to deliver factual and proven information, so at least you’ll now have all the details on the engine’s firing order and cylinder layout in one place.
