Dodge 6.2L (376 cu in) firing order — diagram & guide
Where efficiency meets excellence is in the Dodge 6.2L firing order.
If you own a car with the HEMI V8 engine or adore those beautiful Hellcat machines, then the 6.2-liter V8 needs no introduction. However, if you face any issues with your supercharged beast, the time calls for a Dodge 6.2L (376 cu in) firing order.
Since this engine is based on previous HEMI engines made by Chrysler, many drivers wonder if the firing order is still the same as before. So, join us in this guide as we clear all doubts and give you a proper in-depth analysis of the Hellcat engine’s firing order.
Dodge 6.2L Hellcat firing order
To give you an instant solution and answer, the Dodge 6.2L Hellcat firing order is 1-8-4-3-6-5-7-2, so that’s exactly the same order as the previous 5.7-liter HEMI V8. However, this one is significantly boosted by a 2.3-liter twin-screw supercharger that produces that characteristic Hellcat whine.
The thing with this firing order is that it’s not what you’d regularly anticipate since the cylinder pairs on opposite sides of the crankshaft fire at the same moment, and that puts stress on the cams as well.
So, if you notice even the slightest issue, make sure to pop that hood open and take a look at the cylinders closely. It doesn’t take being an expert to do this – we’ll guide you through the whole process as we move on to the cylinder layout.
Dodge 6.2L cylinder
The order of cylinders within this engine is similar to that of the previous 5.7-liter HEMI, and it’s the same for all of these engines. Some versions came with the active fuel management system, but that doesn’t make the firing order or the cylinder layout any different.
Namely, the cylinders are ordered in two banks – one at the driver’s side and one at the passenger’s side. The “odd” bank contains cylinders 1, 3, 5, and 7 on the driver’s side, while the other one comes with cylinders 2, 4, 6, and 8.
The engine is placed longitudinally, so it’s easy to figure out where the first cylinder is positioned. It’s the one on the front end of the driver’s side bank, and you can use the cylinder numbering scheme together with the firing order to diagnose misfiring cylinders or minor issues.
Dodge 6.2L vehicle applications
Now that you know a bit more about one of Dodge’s best engines and its firing order, it’s time to see which vehicles this order can be applied to. Here’s a complete list of Dodge’s Hellcat models with the 6.2-liter HEMI V8 under the hood:
- Dodge Challenger SRT Hellcat
- Dodge Charger SRT Hellcat
- Dodge Durango SRT
The same engine also went into the RAM 1500 Rebel and Jeep Grand Cherokee Trackhawk, only the Challenger had slightly upgraded power output among all of these.
Our take
Well, there you have it – we’ve gone through the Dodge 6.2L 376 firing order to help you find the cause of potential misfires and diagnose some minor engine issues. Make sure to properly inspect each cylinder by its firing order to prevent missing out on some potentially dangerous leaks or similar issues.
