Chevrolet Traverse (2008-2023) firing order — diagram & guide
Chevrolet Traverse firing order
Back in 2007, Chevy announced the introduction of its first full-size crossover – the Traverse. Initially, it was supposed to be a short-lived model but due to its practicality and dependable engine options, it stuck around to this day.
So, for the sake of all those of you who own any of the Traverse models, this guide on the Chevy Traverse (2008-2023) firing order will help you with DIY undertakes to maintain hte engine. We’ll discuss the firing pattern for each engine option along with the cylinder configuration to make the job easier for you.
| TRAVERSE YEARS | ENGINE | FIRING ORDER |
|---|---|---|
| 1st Gen (2009-2017) | 3.6L V6 | 1-2-3-4-5-6 |
| 2nd Gen (2018-2023) | 2.0L Turbo | 1-3-4-2 |
| 3.6L V6 | 1-2-3-4-5-6 |
First-generation Chevy Traverse (2009-2017) firing order
For the first-gen model, Chevy used only a single V6 engine option and it was the LLT 3.6-liter engine. Still, it turned out to be just fine as the engine was more than reliable, and we’ll lay down all the details to help you maintain the engine right below.
Chevy Traverse 3.6L firing order
For the Chevy Traverse 3.6L engine, the firing order is 1-2-3-4-5-6 and it’s a firing order also used by a variety of other Chevy V6. The engine is transversely placed in the engine bay and it features a rather simple cylinder configuration.
The first cylinder is placed in the upper cylinder bank with cylinders 3 and 5. All the cylinders are arranged from left to right, and the same goes for bottom-placed cylinders, only this time cylinders 2, 4, and 6 are spread from left to right.
Second-generation Chevy Traverse (2018-2023) firing order
The second-gen model started production in 2018 and once again the 3.6-liter V6 engine has been kept in the lineup. However, the updated 3.6L V6 was reserved for the higher trims of the Traverse, and the base engine was replaced with a smaller 2.0-liter turbo four-cylinder engine.
So, we’ll discuss the 2.0-liter one since the 3.6L V6 used the same firing order and configuration as in the previous generation.
Chevy Traverse 2.0L firing order
The Chevy Traverse 2.0L firing order is 1-3-4-2 and if you own this version of the Traverse, at least you’ll have an easier time with the maintenance. Along with a simple firing order, the cylinder layout is also pretty simple since the cylinders are arranged from left to right in a straight-four order.
So, you’ll find the first cylinder as the left-most one, and cylinders 2, 3, and 4 follow right up toward the right side of the engine.
Our take
Overall, the Traverse is a great option for all those looking for a reliable and versatile daily ride, and it’s mostly due to its durable engines. So, we hope you now have all it takes to extend the life cycle of your Traverse engine regardless of its configuration and make sure to closely follow the firing order of each engine.
