Cadillac SRX (2004-2016) firing order — diagram & guide
Crafting excellence in every turn with the Cadillac SRX firing order.
The Cadillac SRX made a perfect combination of luxury and practicality for a compact SUV, and one of the main reasons why it’s a beloved car is the engine selection. Although the engine offer only included a few options, those were some of the best Cadillac engines of that time.
Even so, knowing the Cadillac SRX (2004-2016) firing order can be of great help if you plan on checking the engine for misfires or similar reasons. Our team therefore presented you with this guide including all the engine details and firing orders for commonly used engines for the SRX.
| SRX YEARS | ENGINE | FIRING ORDER |
|---|---|---|
| 1st Gen (2004-2009) | 3.6L V6 | 1-2-3-4-5-6 |
| 4.6L V8 | 1-2-7-3-4-5-6-8 | |
| 2nd Gen (2010-2016) | 2.8L V6 | 1-2-3-4-5-6 |
| 3.0L V6 | 1-2-3-4-5-6 | |
| 3.6L V6 | 1-2-3-4-5-6 |
First-generation Cadillac SRX (2004-2019) firing order
The first-generation Cadillac SRX featured only two engine options, and these were the 3.6-liter V6 and a Northstar 4.6L V8. So, we’ll first go through the differences in the firing order of these two engines, and then we’ll move on to the second-gen engines.
Cadillac SRX 3.6L firing order
As the base engine option for the SRX, we have the 3.6-liter Cadillac V6 engine. So, the Cadillac SRX 3.6L firing order is 1-2-3-4-5-6, and the cylinder layout is also rather simple. So, cylinders 1, 3, and 5 are on the passenger’s side, while cylinders 2, 4, and 6 are on the driver’s side of the engine.
Cadillac SRX 4.6L firing order
The Cadillac SRX 4.6L firing order is 1-2-7-3-4-5-6-8 and this engine was used in a higher-trim SRX version. However, this V8 engine is special for its cylinder configuration, since it’s a transverse engine. This layout means that there’s an upper and a lower cylinder bank, both of which contain four cylinders.
So, the upper bank houses cylinders 1, 3, 5, and 7 ordered left to right, while the bottom bank stores cylinders 2, 4, 6, and 8 right below those.
Second-generation Cadillac SRX (2010-2016) firing order
With the second-gen model, Cadillac decided to keep the V6 engine as a base option, but the 4.6-liter V8 wasn’t used any longer. On the other hand, there were two new V6 engines added to the mix, including a 2.8-liter V6 and a 3.0-liter V6 engine.
Cadillac SRX 2.8L firing order
The 2.8-liter Cadillac SRX firing order is 1-2-3-4-5-6, and this V6 engine is the base option for the SRX. Besides a pretty simple firing order, the engine is also simple in terms of the cylinder layout. That being said, cylinders 1, 3, and 5 are ordered on the passenger’s side of the engine.
The cylinders 2, 4, and 6 are on the driver’s side of the engine, and all of the cylinders are ordered front to rear.
Cadillac SRX 3.0L firing order
The V6 engine used in the SRX with the 3.0-liter model is pretty similar to the 2.8-liter engine. So, the Cadillac SRX 3.0L firing order is 1-2-3-4-5-6. Along with that, the cylinder layout of the engine matches the one of the 2.8L engine.
So, the first cylinder is the one on the passenger’s side, while cylinders 3 and 5 follow right up toward the rear end of the engine. Cylinders 2, 4, and 6 are all located on the driver’s side, also ordered front to rear.
Our take
Now that we’ve gone through all the Cadillac SRX engine options and their firing orders, you should have an easier time maintaining your particular engine. We hopefully gave you some starting points through this guide, so make sure to keep an eye on the cylinder order of each engine.
