P2068 code — how to fix error fast

Error codes in a car can often be pretty worrying, but there are some of them like the P2068 code that seem pretty harmless and yet can be rather problematic. It’s, therefore, crucial to act on time, but most drivers face an issue when trying to figure out the P2068 code meaning and what it does in your car.

So, we thought we’d help you out by going over some of the most important implications of this code and how it may reflect on the drivability of your car. Sit tight as we go through the symptoms, causes, and fixes so you can easily remove the code without breaking the bank.

Why you can trust REREV’s OBD2 code advice: Our automotive expert researchers with experienced mechanics undertakes a thorough research methodology to deliver precise insights on OBD codes. Find out more about OBD2 codes research process..

What does the P2068 code mean?

The P2068 code is a diagnostic trouble code that indicates an issue with the fuel level sensor “B” circuit. This code is set when the powertrain control module (PCM) detects that the fuel level sensor “B” circuit is not operating correctly.

The fuel level sensor is responsible for sending the fuel level information to the PCM, which, in turn, uses this information to calculate the fuel economy and determine when to turn on the low fuel warning light. So, if you don’t want to constantly be looking at the fuel gauge and wonder if you have enough fuel left in the tank while driving, it’s important to fix the code as soon as possible.

What causes the P2068 code?

Several potential causes can trigger the P2068 code, including a malfunctioning fuel level sensor, a damaged wiring harness, or a faulty PCM. So, it’s not that easy to figure it out, but we’ll help you by giving you some more insight into each of the possible reasons behind the code:

Faulty or damaged fuel level sensor

The fuel level sensor may be malfunctioning or send incorrect signals to the engine control module (ECM). In this case, the fuel level gauge may not be working at all, or it may be late to light up the low fuel lamp on the dash which can be pretty dangerous when driving.

Corroded writing or connections

The connectors between the fuel level sensor and the ECM may be corroded or damaged, leading to poor signal transmission. Also, a short circuit, open circuit, or damaged wiring in the fuel level sensor circuit can lead to the code showing up on the scanner.

Problems with the ECM

In rare cases, the engine control module (ECM) itself may be faulty and unable to properly receive signals from the fuel level sensor. Sometimes it just needs to be reprogrammed, or it may have not loaded the previously used metrics properly if you’ve been disconnecting the battery recently before the code showed up.

Which car models does the P2068 code affect the most?

While the issues with fuel level sensors and circuits can happen in any car model, we tried to see if there’s a connection with some particular models. As we went through the data, here’s what we found to be the list of models that are most prone to the code P2068:

• BMW 3 Series: The BMW 3 Series is a popular compact executive car that has been known to experience issues with the fuel level sensor circuit.
• Volkswagen Jetta: The Volkswagen Jetta has also been reported to have problems with the fuel level sensor circuit which leads to the code P2068.
• Mercedes-Benz C-Class: The Mercedes-Benz C-Class is another compact executive car that may be susceptible to the P2068 code because of the faulty wiring or connections in high-mileage models.

How to diagnose the P2068 code

There are several ways of diagnosing the code P2068, as you can probably guess by all the possible reasons behind it. However, it’s not that easy to figure out the source of the problem, which is why we’ll list all the options you have when it comes to pinpointing the cause of the code:

Check for related codes

The P2068 code may be accompanied by other codes that can help to narrow down the problem. The mechanic will use a diagnostic scanner to check for any additional codes.

Inspect the fuel level sensor circuit

You can entrust this task to a trusted mechanic who will visually inspect the wiring and connectors in the fuel level sensor circuit for any damage or corrosion.

Test the fuel level sensor

The fuel level sensor will be tested using a multimeter to ensure that it is sending accurate signals to the ECM.

Check the ECM

If all other components check out, the mechanic may need to perform additional tests on the ECM to ensure that it is functioning properly.

How to fix the P2068 code

Fixing the P2068 code requires several steps, including replacing the fuel level sensor, repairing the wiring harness, or replacing the PCM. The cost of fixing this code will depend on the cause of the issue. Replacing the fuel level sensor will cost between $100 and $200. As the repair cost can vary depending on what’s causing the issue, here’s what you can do to fix the problem after diagnosing it:

Replace the fuel level sensor

If the fuel level sensor is found to be faulty, it will need to be replaced with a new one. This is a relatively straightforward repair that can be done by a qualified mechanic.

Repair damaged wiring or connections

If there is damage or corrosion in the wiring or connectors of the fuel level sensor circuit, these components will need to be repaired or replaced.

Deal with the ECM issues

In rare cases, a faulty ECM may be causing the P2068 code. If this is the case, the ECM will need to be replaced with a new one.

How to prevent the P2068 code

Once the code has been cleared, your fuel gauge will be properly working again but that doesn’t mean it will stay like this forever. It’s best to use a few simple tricks to prevent the code from re-appearing, so here’s what you can do in that sense:

• Regularly check the fuel level sensor
• Inspect the wiring harness for any signs of damage
• Perform routine maintenance of your car’s fuel system

Additionally, it is essential to properly maintain the affected system by following the manufacturer’s recommended maintenance schedule.

Our take

In the end, it seems like the code P2068 is more dangerous as it prevents the driver from knowing the exact fuel level situation than it is for the mechanical systems of your car. Still, it’s essential to fix it as soon as possible to avoid finding yourself in an ungrateful situation where you don’t know if you’ll make it to your destination or not.

You can rely on our guide to help you prevent this scenario from happening and also prevent the code from showing up again once it’s cleared.

.