REREV

Car advice put simply.

  • Articles
  • Cars
    • Celebrity car collections
    • Car years to avoid
    • OBD2 codes
  • Engines
    • Firing orders
  • Tires
    • Tire and store reviews
  • Glossary
  • Statistics

P0607 code — how to fix error fast

Empower your maintenance routine with the P0607 code. Understand its essence and champion your car's longevity.

A person holding a odometer in a car.
A man in a blue jacket smiling in front of a red wall.
Filip Gromovic June 22, 2023 |

If you’ve received the code P0607 after an OBD2 scan, things can seem pretty scary since this code stands for “control module performance”. Before you assume that it’s an issue that compromises the drivability of your car, we’ll help you get to the P0607 code meaning, what it stands for, and how you can prevent reading it during the next scan.

Don’t worry, our team of automotive experts is at your service as we plan on helping you every step of the way. This includes getting to diagnose the code, determining its causes, and figuring out the solution. So, without further delay, let’s get straight into the details.

Why you can trust REREV’s OBD2 code advice: Our automotive expert researchers with experienced mechanics undertakes a thorough research methodology to deliver precise insights on OBD codes. Find out more about OBD2 codes research process..

What does the P0607 code mean?

The P0607 code refers to a fault in the engine control module (ECM) or powertrain control module (PCM). The ECM/PCM is responsible for controlling various aspects of the engine’s performance, such as fuel injection and ignition. When there’s a problem with the ECM/PCM, it can cause various issues with the engine’s operation, ranging from decreased performance to stalling.

The code mostly appears for one of the two main reasons – it can either be a problem with the module’s powering system, or a memory loss that may even be fixed by reprogramming the sensor. With this in mind, let’s jump to the possible causes of this code since there are quite a few parts that may trigger it.

What causes the P0607 code?

The code P0607 can be caused by a variety of factors and it’s mostly due to a failure of one of the parts that have to do with the sensor’s operation. Here’s our complete list of the affected parts that may consequently lead to the code appearing:

Faulty ECM/PCM

The most common cause of the P0607 code is a faulty ECM/PCM. The module may have a software or hardware issue that needs to be addressed. If it keeps losing power, it’s likely to mess up with the data and this can even affect your engine’s performance.

So, it’s essential to immediately deal with this problem and prevent the power loss from affecting the engine’s output.

Electrical issues

Electrical issues such as damaged wiring or a malfunctioning sensor can cause the code to appear. The module operates based on an electric charge and it’s crucial to check the connections before you move on to the next possible reasons.

Battery voltage issues

A weak battery or voltage issue can cause the ECM/PCM to malfunction, leading to the code. It can also appear if your battery is draining while it nears the end of its life cycle, or if there’s a parasitic draw from one of your car’s interior systems.

Other factors

Other factors, such as a damaged alternator or a failed starter motor, can also cause the P0607 code to appear. This is not as common as with other listed reasons, but it’s still worth checking out if nothing else seems to be causing the code.

Which car models does the P0607 code affect the most?

The P0607 code can appear on any car with an ECM/PCM system. However, some models are more prone to the code than others. These include:

  • Chevy Cruze: This car model has been reported to have issues with the ECM, leading to the code P0607 with symptoms like reduced fuel efficiency and power loss.
  • Ford Focus: Owners of this car model have reported issues with the ECM causing the transmission to slip or jerk, leading to unsafe driving conditions, mostly caused by the memory loss of the module which leads to code P0607.
  • Toyota Camry: This car model has been reported to experience ECM-related issues that can cause the engine to stall or misfire, leading to potential safety hazards.

These models have a higher likelihood of experiencing the P0607 code due to issues with their ECM/PCM systems.

How to diagnose the P0607 code

Diagnosing the P0607 code requires the use of specialized diagnostic tools. The following steps can help diagnose the issue:

Check for other codes

Before diagnosing the P0607 code, it’s important to check for other codes that may be present. These codes can provide additional information about the issue at hand.

Check the battery voltage

Check the battery voltage to ensure that it’s within the manufacturer’s recommended range. If it’s not, it may be necessary to replace the battery.

Check the wiring and sensors

Check the wiring and sensors for any signs of damage or malfunction. Replace any damaged components as necessary.

Check the ECM/PCM

This one is among the most common reasons behind the code and it often happens if the ECM simply loses charge or if its memory gets depleted. You can also test the module by using specified diagnostic tools like a multimeter to figure out if module defects are causing the code P0607.

How to fix the P0607 code

This code often leads to delicate situations where it may even appear due to a system fault or a temporary malfunction in the module’s operation. So, it’s crucial to keep all the fixing options open until you can figure out what’s causing the issue. After a proper diagnosis has been made, it’s time to move on with a solution based on one of the following methods:

Clear the code

In some cases, the P0607 code may be triggered by a temporary glitch in the ECM. Clearing the code using an OBD-II scanner can sometimes resolve the issue.

Inspect the connections and wires

Loose or corroded connections between the ECM and other components can cause the P0607 code to appear. Inspecting and tightening these connections can help resolve the issue.

Replace the ECM

If the above steps do not resolve the issue, replacing the ECM may be necessary. This is typically done by a professional mechanic who can ensure that the new ECM is programmed correctly and installed properly.

Update the software

In some cases, updating the software for the ECM can help resolve issues that cause the P0607 code to appear. It’s important to use only manufacturer-approved software updates to ensure compatibility and avoid further issues.

How to prevent the P0607 code

Preventing the P0607 code requires proper maintenance of the vehicle’s ECM/PCM system. This includes making use of the following maintenance practices:

  • Keeping up with a regular maintenance schedule
  • Proper control module system maintenance
  • Getting professional help from a mechanic

Performing routine maintenance, such as oil changes and tune-ups, can help prevent issues with the ECM/PCM system. Ensuring that the ECM/PCM system is properly maintained, including checking the wiring and sensors regularly, can help prevent the code from appearing.

Our take

All in all, diagnosing the code alone can’t help too much if you don’t know how to deal with it. That’s why our team wanted to help with this complete guide on dealing with the code and its consequences so you can hopefully fix the matter instantly and erase the code.

As it turns out, it can sometimes just be a matter of reprogramming the ECM, so make sure to keep all of your options open before you figure out the solution.

What does the P0607 code mean?

The P0607 code indicates a malfunction in the internal control module (ECM) of a vehicle. This code may be triggered by a variety of issues, including faulty wiring, a dead battery, or a software issue.

What are the symptoms of the P0607 code?

The symptoms of the P0607 code can vary depending on the underlying issue. Common symptoms include reduced engine performance, rough idling, stalling, and decreased fuel efficiency.

Can I still drive my car with the P0607 code?

Driving with the P0607 code is not recommended as it can lead to further damage or safety hazards. It’s important to address ECM-related issues promptly to avoid more serious problems on the road.

Previous post: P2002 code
Next post: P2227 code
  • Filip Gromovic
    Filip Gromovic

    Filip is a lifelong car enthusiast with over 3 years of experience writing about cars and had worked as a mechanic apprentice for over 5 years, gaining hands-on expertise in automotive mechanics. At REREV, he combines his passion for cars with his comprehensive knowledge to provide readers with a unique blend of technical insight and engaging storytelling that sets the bar high for automotive content.

    Recent Posts
    P2035 code — how to fix error fast
    Bad throttle position sensor symptoms — causes and fixes
    How does a jake brake work? — explained
REREV logo

Website

  • About
  • Editorial Guidelines
  • Contact
  • Terms
  • Privacy

Car Insights

  • Years to avoid
  • Collections
  • Statistics
  • Glossary

© 2025 REREV. All rights reserved.