C1095 code — how to fix error fast

While getting the C1095 code on a diagnostic scanner tool isn’t good, it’s at least not as severe as issues related to the engine or transmission. However, most drivers are unfamiliar with the C1095 code meaning and that causes quite a few problems when it comes to solving it.

Luckily, our team of automotive experts has decided to share some expert insight to bring you a detailed guide on solving the code. We’ll start with the explanation of what the code means for your vehicle, and then move on with a list of possible causes and solutions, so stand by for detailed instructions.

Why you can trust REREV’s OBD2 code advice: Our automotive expert researchers with experienced mechanics undertakes a thorough research methodology to deliver precise insights on OBD codes. Find out more about OBD2 codes research process..

What does the C1095 code mean?

The C1095 code is related to the hydraulic pump motor circuit in the ABS system. It indicates that there is a problem with the circuit, which could be caused by a malfunctioning pump motor or a damaged circuit. When this happens, the ABS system may not function correctly, leading to reduced braking performance and increased risk of accidents.

Some of the symptoms of the code include the ABS warning light turning on, reduced braking performance, and unusual noises coming from the ABS system. Ignoring this code could lead to more serious problems, such as brake failure or loss of control of the vehicle.

What causes the C1095 code?

There are several potential causes of the C1095 code, ranging from simple electrical issues to more complex problems with the ABS system. Here are some of the most common causes:

Malfunctioning pump motor

The pump motor is responsible for building pressure in the hydraulic system, which is necessary for the ABS system to function correctly.

If the pump motor is malfunctioning, the hydraulic pressure may not be sufficient, leading to the C1095 code. A faulty pump motor may be caused by worn-out brushes, a damaged armature, or a faulty relay.

Damaged circuit

The hydraulic pump motor circuit may become damaged due to a short circuit or open circuit. This could be caused by damaged wiring, loose connections, or corrosion. In some cases, the damage may be visible, while in others, it may require extensive testing to identify the problem.

Failed ABS module

The ABS module is a critical component of the ABS system, and if it fails, it could lead to the C1095 code. The ABS module may fail due to internal circuitry problems or damage to the module itself.

Which car models does the C1095 code affect the most?

The C1095 code can affect any car with an ABS system, but some models are more prone to this problem than others. Some of the car models that are known to be affected by this code include:

• Ford Escape: This vehicle has been known to suffer from problems with the ABS module which often led drivers to troubles with the system and caused the code to emerge.
• Mazda Tribute: Much like the Escape, the Mazda Tribute is also known to suffer from problems with the ABS system that often lead to this code, but this time it’s mostly due to electrical connections.
• Mercury Mariner: Finally, the Mercury Mariner has been facing a lot of issues with the ABS system, so it’s among the car models with the most NHTSA complaints in this category.

How to diagnose the C1095 code

Now comes the key part – we’ll help you diagnose the exact issue behind the code in your vehicle to help you deal with the issue a bit easier. You can mostly start with the OBD2 scanner tool and move your way up from there, but we also suggest you take consideration of the following steps:

Check the ABS fuse

The first step in diagnosing the C1095 code is to check the ABS fuse. A blown fuse could cause the ABS system to malfunction, leading to the C1095 code.

Check the wiring

Check the wiring connections to the hydraulic pump motor and ABS module. Look for any signs of damage or corrosion, and ensure that the connections are tight and secure.

Check the pump motor

Use a multimeter to test the pump motor’s resistance and check for any signs of wear or damage. If the pump motor has failed, it will need to be replaced.

Check the ABS module

If the pump motor and wiring are functioning correctly, the ABS module may be the problem. Use an OBD-II scanner to check for any error codes related to the ABS module, and perform a diagnostic test to identify the problem.

How to fix the C1095 code

Fixing the C1095 code may require replacing the pump motor, repairing the wiring, or replacing the ABS module. Here are some potential fixes for each cause of the code:

Fix a malfunctioning pump motor

If the pump motor is the problem, it will need to be replaced. The cost of a new pump motor can range from $200 to $500, depending on the make and model of your vehicle.

Deal with a damaged circuit

Repairing the circuit is one of the most common solutions to this code and it includes replacing a damaged or worn circuit to get the power flow properly circulating again through the system.

It could lead to a repair bill of around $100 or even up to $300 for some car models.

Replace an ABS module

Finally, oftentimes drivers may need to replace the entire ABS module which can be pretty expensive – from $500 to $1000 for most vehicle models.

Still, this repair is a bit rarer one and you should first check the fuses, circuits, and the pump motor before attempting to replace the ABS module.

How to prevent the C1095 code

Preventing the C1095 code requires proper maintenance of the ABS system. Here are some preventative measures you can take:

• Perform routine maintenance
• Replace any worn brake components
• Properly maintain the hydraulic motor, pump, and circuit

Making use of these preventive methods can help you move your way up from experiencing the code to never having to face the issue again.

Our take

Overall, the C1095 code is a serious problem that could affect the braking performance of your vehicle. If you notice any symptoms of this code, it is important to diagnose and fix the problem as soon as possible.

By following the steps outlined in this article, you can diagnose and fix the C1095 code and prevent it from happening in the future.